發(fā)表學術論文100余篇，授權專利40余項，多次參加電氣工程領域知名國際學術會議擔任分會主席并做學術報告。獲得會議優(yōu)秀論文獎8次，國家公派留學人員學術創(chuàng)新獎2次。部分SCI論文如下： 1.W. Zhao, H. Shen, T. A. Lipo, X. Wang, “A New Hybrid Permanent Magnet Synchronous Reluctance Machine with Axially Sandwiched Magnets for Performance Improvement,” IEEE Transactions on Energy Conversion. 2.W. Zhao, T. A. Lipo, B. Kwon, “Material-Efficient Permanent-Magnet Shape for Torque Pulsation Minimization in SPM Motors for Automotive Applications,” IEEE Transactions on Industrial Electronics. 3.Z. Xing, X. Wang, W. Zhao, “An accurate calculation method of natural frequencies of the radial-flux slotted motors considering end covers,” IEEE Transactions on Industrial Electronics. 4.Z. Xing, X. Wang, W. Zhao, “Fast calculation of electromagnetic vibration of surface-mounted PMSM considering teeth saturation and tangential electromagnetic force,” IEEE Transactions on Industrial Electronics. 5.Z. Xing, X. Wang, W. Zhao, L. Sun, N. Niu, “Calculation method for natural frequencies of stator of permanent magnet synchronous motors based on three-dimensional elastic theory,” IEEE Transactions on Energy Conversion. 6.Z. Xing, X. Wang, W. Zhao, “Optimization of stator slot parameters for electromagnetic vibration reduction of permanent magnet synchronous motors,” IEEE Transactions on Transportation Electrification. 7.W. Zhao, D. Chen, T. A. Lipo, B. Kwon, “Dual Airgap Stator- and Rotor-Permanent Magnet Machines With Spoke-Type Configurations Using Phase-Group Concentrated Coil Windings,” IEEE Transactions on Industry Applications. 8.W. Zhao, M. Tian, X. Wang, “Analysis of the Synchronization Process and the Synchronization Capability for a Novel 6/8-Pole Changing LSPMSM,” IEEE Transactions on Magnetics. 9.W. Zhao, H. Shen, W. Chai, X. Wang, B. Kwon, “Optimal Design and Experimental Test of a SPM Motor With Cost-Effective Magnet Utilization to Suppress Torque Pulsations,” IEEE Transactions on Magnetics. 10.W. Zhao, J. Kwon, X. Wang, T. A. Lipo, B. Kwon, “Optimal Design of a Spoke-type Permanent Magnet Motor with Phase-group Concentrated-coil Windings to Minimize Torque Pulsations,” IEEE Transactions on Magnetics. 11.W. Zhao, F. Xing, X. Wang, T. A. Lipo, B. Kwon, “Design and Analysis of a Novel PM-Assisted Synchronous Reluctance Machine with Axially Integrated Magnets by Finite Element Method,” IEEE Transactions on Magnetics. 12.W. Zhao, T. A. Lipo, B. Kwon, “Torque Pulsation Minimization in Spoke-type Interior Permanent Magnet Motors with Skewing and Sinusoidal Permanent Magnet Configurations,” IEEE Transactions on Magnetics. 13.W. Zhao, T. A. Lipo, B. Kwon, “Dual-stator Two-phase Permanent Magnet Machines with Phase-group Concentrated-coil Windings for Torque Enhancement,” IEEE Transactions on Magnetics. 14.W. Zhao, D. Chen, T. A. Lipo, B. Kwon, “Performance Improvement of Ferrite-Assisted Synchronous Reluctance Machines Using Asymmetrical Rotor Configurations,” IEEE Transactions on Magnetics. 15.W. Zhao, T. A. Lipo, B. Kwon, “A Novel Dual-Rotor, Axial Field, Fault-Tolerant Flux-Switching Permanent Magnet Machine with High-Torque Performance,” IEEE Transactions on Magnetics. 16.W. Zhao, T. A. Lipo, B. Kwon, “Optimal Design of a Novel Asymmetrical Rotor Structure to Obtain Torque and Efficiency Improvement in Surface Inset PM Motors,” IEEE Transactions on Magnetics. 17.W. Zhao, F. Zhao, T. A. Lipo, B. Kwon, “Optimal Design of a Novel V-Type Interior Permanent Magnet Motor with Assisted Barriers for the Improvement of Torque Characteristics,” IEEE Transactions on Magnetics. 18.W. Zhao, T. A. Lipo, B. Kwon, “Comparative Study on Novel Dual Stator Radial Flux and Axial Flux Permanent Magnet Motors with Ferrite Magnets for Traction Application,” IEEE Transactions on Magnetics. 19.Z. Xing, X. Wang, W. Zhao, “Research on Weakening Measure of Radial Electromagnetic Force Waves in Permanent Magnet Synchronous Motors by Inserting Auxiliary Slots,” IET Electric Power Applications. 20.Z. Xing, W. Zhao, X. Wang, Y. Sun, “Reduction of Radial Electromagnetic Force Waves Based on PM Segmentation in SPMSMs,” IEEE Transactions on Magnetics. 21.J. Ren, X. Wang, W. Zhao, B. Peng, “Electromagnetic Force Density Calculation in Surface-Mounted PM Synchronous Machine with Rotor Eccentricity by an Equivalent Transformation Method,” IET Electric Power Applications. 22.B. Peng, X. Wang, W. Zhao, J. Ren, “Study on Shaft Voltage in Fractional Slot Permanent Magnet Machine With Different Pole and Slot Number Combinations,” IEEE Transactions on Magnetics. 23.Fu. Xing, W. Zhao, B. Kwon, “Design and Optimization of a Novel Asymmetric Rotor Structure for a PM-assisted Synchronous Reluctance Machine,” IET Electric Power Applications. 24.B. Peng, W. Zhao, X. Wang, “The Method for Reducing Intrinsic Shaft Voltage by Suitable Selection of Pole-Arc Coefficient in Fractional-Slot Permanent-Magnet Synchronous Machines,” IEEE Transaction on Magnetics. 25.M. Tian, W. Zhao, X. Wang, et al., “Analysis on a Novel Flux Adjustable Permanent Magnet Coupler With a Double-Layer Permanent Magnet Rotor,” IEEE Transactions on Magnetics. 26.W. Chai, W. Zhao, B. Kwon, “Optimal Design of Wound Field Synchronous Reluctance Machines to Improve Torque by Increasing the Saliency Ratio,” IEEE Transactions on Magnetics. 27.M. Raza, W. Zhao, T. A. Lipo, B. Kwon, “Performance Comparison of Dual Airgap and Single Airgap Spoke-type Permanent Magnet Vernier Machines,” IEEE Transactions on Magnetics. 28.T. Yazdan, W. Zhao, T. A. Lipo，B. Kwon, “A Novel Technique for Two-Phase BLDC Motor to Avoid the Demagnetization,” IEEE Transactions on Magnetics. 29.S. Kumar, W. Zhao, Z. S. Du, T. A. Lipo, B. Kwon, “Design of Ultrahigh Speed Axial-Flux Permanent Magnet Machine with Sinusoidal Back EMF for Energy Storage Application,” IEEE Transactions on Magnetics. 30.D. Chen, W. Zhao, B. Kwon, “A Novel Cost-Effective Two-Level Inverter with Combined Use of Thyristors and IGBTs,” Journal of Electrical Engineering & Technology. 31.Z. Xing, X. Wang, W. Zhao, “Cogging torque reduction based on segmented skewing magnetic poles with different combinations of pole-arc coefficients in surface-mounted permanent magnet synchronous motors,” IET Electric Power Applications. 32.Z. Xing, X. Wang, W. Zhao, “ Research on weakening measure of radial electromagnetic force waves in permanent magnet synchronous motors by inserting auxiliary slots,” IET Electric Power Applications. 33.Z. Xing, X. Wang, W. Zhao, “Design and analysis of basic model of high-speed surface-mounted permanent magnet synchronous motors based on subdomain method,” Journal of Electrical Engineering & Technology. 34.D. Chen, W. Zhao, B. Bai, B. Kwon, “Analysis and Experiment of Transformer Vibration and Noise Considering Electrical Steel Sheet Magnetostriction,” International Journal of Applied Electromagnetics and Mechanics. 35.W. Zhao, C. Liu, Y. Li, X. Fan, X. Wang, “Design and Analysis of a High-Performance Surface Inset Permanent Magnet Motor with Asymmetrical Rotor,” International Journal of Applied Electromagnetics and Mechanics. 36.M. Yu, W. Zhao, C. Liu, X. Wang, B. Kwon, “Design and Analysis of a Novel Variable Flux Spoke-Type Motor for Washing Machines,” International Journal of Applied Electromagnetics and Mechanics. 37.W. Zhao, H. Shen, X. Fan, X. Wang, B. Kwon, “Design and Analysis of a Novel Hybrid-Excited Wound-Rotor Synchronous Machine with High Electromagnetic Performance,” International Journal of Applied Electromagnetics and Mechanics. 38.W. Zhao, H. Shen, D. Chen, X. Wang, B. Kwon, “Design and Analysis of a High-Performance Dual-Rotor PM Synchronous Reluctance Machine with Toroidal Windings,” International Journal of Applied Electromagnetics and Mechanics. 39.W. Zhao, B. Kwon, “Cost-effective Permanent Magnet Shape for Reducing Cogging Torque and Torque Ripple in Surface-Mounted Permanent Magnet Machines,” International Journal of Applied Electromagnetics and Mechanics. 40.W. Zhao, B. Kwon, “Dual Rotor Flux Switching Permanent Magnet Machines with Phase-group Concentrated-coil Windings for High Performance,” International Journal of Applied Electromagnetics and Mechanics. |
